[sumo-user] Vehicule Distance

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

[sumo-user] Vehicule Distance

IT Tech
Hi Everyone, 

I need to load vehicles on the simulation with a distance gap of 2 meters.

Any idea how to achieve this?

For example : 

when I load vehicles in the simulation, sumo does inject one vehicle every 2 sec, so with a speed of 100 km/h, every vehicle is 55 meters apart from the other, I need that 55 meters to be 2 meters, so  I need that sumo will load 1 vehicle every 0.07 sec, how to achieve that and ignore minimum gap of the car following model.

Regards,



_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Reply | Threaded
Open this post in threaded view
|

Re: [sumo-user] Vehicule Distance

Jakob Erdmann
    <vType id="silly" tau="0.0001" minGap="2" speedDev="0" decel="0.0001"/>
    <route id="r0" edges="gneE0"/>
    <vehicle id="lead" type="silly" depart="0.00" departPos="4200" departSpeed="max" route="r0"/>
    <flow id="flow" type="silly" begin="0.00" end="0" number="599" departSpeed="max" departPos="last" route="r0"/>

Am Di., 12. Jan. 2021 um 17:38 Uhr schrieb IT Tech <[hidden email]>:
Hi Everyone, 

I need to load vehicles on the simulation with a distance gap of 2 meters.

Any idea how to achieve this?

For example : 

when I load vehicles in the simulation, sumo does inject one vehicle every 2 sec, so with a speed of 100 km/h, every vehicle is 55 meters apart from the other, I need that 55 meters to be 2 meters, so  I need that sumo will load 1 vehicle every 0.07 sec, how to achieve that and ignore minimum gap of the car following model.

Regards,


_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user

_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
Reply | Threaded
Open this post in threaded view
|

Re: [sumo-user] Vehicule Distance

IT Tech
Thank you very much Jakob.
Regards, 

On Wed, Jan 13, 2021, 10:00 AM Jakob Erdmann <[hidden email]> wrote:
    <vType id="silly" tau="0.0001" minGap="2" speedDev="0" decel="0.0001"/>
    <route id="r0" edges="gneE0"/>
    <vehicle id="lead" type="silly" depart="0.00" departPos="4200" departSpeed="max" route="r0"/>
    <flow id="flow" type="silly" begin="0.00" end="0" number="599" departSpeed="max" departPos="last" route="r0"/>

Am Di., 12. Jan. 2021 um 17:38 Uhr schrieb IT Tech <[hidden email]>:
Hi Everyone, 

I need to load vehicles on the simulation with a distance gap of 2 meters.

Any idea how to achieve this?

For example : 

when I load vehicles in the simulation, sumo does inject one vehicle every 2 sec, so with a speed of 100 km/h, every vehicle is 55 meters apart from the other, I need that 55 meters to be 2 meters, so  I need that sumo will load 1 vehicle every 0.07 sec, how to achieve that and ignore minimum gap of the car following model.

Regards,


_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user
_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user

_______________________________________________
sumo-user mailing list
[hidden email]
To unsubscribe from this list, visit https://www.eclipse.org/mailman/listinfo/sumo-user